Getting to know the general characteristics of Yazd Mosaic products

Image
Image

Yazd mosaic

Characteristics of the outstanding mosaics

The approximate weight of each square meter of dimensions 30x30: 62 kg
Approximate weight of each square meter of dimensions 40x40: 77 kg
Approximate thickness: 30x30: 26 mm
Approximate thickness 40x40: 32 mm

Quality and standard product

Domestic and international standards

The Yazd Mosaic company established in the 1975 and this company is one of the first ones in the field of mosaic industry in Iran which used the best automatic Italian’s machinery. The company has received the ISIRI certification license and the international standard diploma "IMS (ISO9001:2000, ISO14001:2004, OHSAS, ISO18001:1999)" which approved by U.K. and Germany.

Orders

Custom productions

The  of this company with different dimensions of 25x25, 30x30, 33x33, 40x40 and 40x80 can be produced and supplied according to the customer's order.

Application type

Suitable for indoor and outdoor spaces

Mosaics are more suitable for closed spaces and open industrial, residential, office areas and places with high traffic and are also ideal for places that need a lot of washing, such as parks and sidewalks. The use of these mosaics is recommended for outdoor spaces that freeze in winter due to their high resistance to freezing.
Image
Image

Yazd Mosaic Company is the first manufacturer of fully automatic machine mosaics with a standard mark in Iran Among the other honors of this company is the acquisition of international management and environmental standards, as well as the title of pioneer of quality and standards

quality control

The dimensions of the produced mosaics are 30x30 and 40x40 cm, accurate and without dimensional tolerance.
The mosaics are produced by fully automatic machines made in Italy and by Iranian technical specialists and experienced workers in this field, and the quality is controlled by the factory laboratory officials who work under the supervision of the Standard Institute.
In the formula of material consumption and also in the making of mosaic, all Iranian standard criteria have been observed in terms of hair breakage, grain breakage, hair network, peeling, dandruff (whiteness), peeling, shine, uniformity of top crust thickness, average dimensions and average top dimensions and thickness, compressive strength, bending, abrasion and other things, and the tests in all cases show the superiority of the products of this factory compared to the standard set by Germany and Iran 755

Technical specifications of mosaics of Yazd Mosaic Company

The diameter of the mosaic consists of two almost equal layers. The first layer consists of cement, grading stone and stone powder, and the second layer is a combination of sand and cement. The mosaics are placed in steam rooms for 48 hours to become dry and resistant. This action makes the product stronger. Mosaics have no dimension tolerance and irregularity, and therefore can be used without seams on the floor and facade. The surface of the mosaics has no shine and is polished by fully automatic SAAB machines, which makes it polished and very beautiful.

Use of quality raw materials

The raw materials used in the mosaics are selected from the best types of natural stones available in Iran, especially the rich mines of Yazd and Isfahan provinces, and no materials that reduce their strength are used in the construction.

Minimal holes to absorb moisture

The mosaics are pressed by a press machine equivalent to 480 tons in a fully automatic manner, and as a result, the creation of small holes inside the mosaic is prevented, and this process lowers the moisture absorption percentage of the products, which is superior to the established standards, and as a result of not absorbing water, it makes them very resistant to cold and frost.

Installation Instructions

While appreciating your good choice, for the sake of the beauty and ease of installing the mosaics, His Highness directs his opinion to the following points for emptying the pallets, as much as possible, a forklift or crane should be used so that, in addition to saving the cost of emptying, the mosaics will not be damaged. Due to the delicacy of the edges of the mosaic, they are facing each other and should be emptied in the same way. Therefore, in case of manual evacuation and transfer, the necessary tickets must be reminded to the worker. Try to install the mosaic in the last stages of building construction (after plastering, false ceiling, etc.) so that the beauty of the carpeted mosaic is not destroyed by plaster and other materials.

There are three ways to install mosaic on the floor and facade:
Installation with sand and cement mortar (with a minimum thickness of 5 cm on a surface where lime mortar has been poured)

Installation with soft cement mortar and stone soil
It is emphasized that type 1 cement must be used in the mortar under the mosaic. Avoid using anti-sulfate cement separately.
The use of salty or inappropriate water as well as salty sands to make mortar will cause the mosaic to deteriorate and scale.
The mosaics produced by this company are 100% sackcloth and without dimension tolerance. For this reason, they must be installed without seams.
Due to the polished polished surface of the mosaic, the mosaics must be installed without posts and height so that they don't need to be re-subbed. With this operation, in addition to the beauty, the implementation cost is also reduced.
After installation, spread the soft cement grout of the same color as the mosaic background on the mosaics and collect it quickly before it dries - to increase the quality of the work, especially for ribbed mosaics, pour the grout only on the seams - so that the transparency of the mosaics is not lost and refrain from walking on the mosaic for 48 hours.
For more beauty, you can create beautiful designs on the floor by using pieces of mosaic or its different colors and using bronze strips or in the form of a 4x4 or 2x4 carpet.
Note that using strong detergents for cleaning will damage the mosaics.
Image

YAZD MOSAIC CO